Beschrijving
TOSHIBA Numeriek Bestuurde Kottermachine met Automatische Gereedschap-wisselaar
TOSHIBA Numeriek Bestuurde Kottermachine met Automatische Gereedschap-wisselaar
| Manufacturer | Okuma | |
| Type | LB3000-MYC | |
| Year | 2012 | |
| CNC Control | OSP P200L-G IGF | |
| Capacity. | ||
| Swing over the bed | 580 mm | |
| Swing over the slide | 470 mm | |
| Turning length | 1 000 mm | |
| Carriage and cross slide. | ||
| Travel | X | 260 mm |
| Z | 1.010 mm | |
| Rapid | X | 25 m/min. |
| Z | 30 m/min. | |
| Y | 12.5 m/min. | |
| Turret | positions | 12, M-V12 NC turret |
| Tool size OD | 25 x 25 mm. | |
| Tool size ID | diameter | 40 mm. |
| Rotation | sec/index | 0,1 |
| Milling tool | ||
| Spindle speed | rpm | 45 - 6.000 |
| Speed ranges | coil switching | 2 |
| Main spindle. | ||
| Spindle diameter at front bearing | 140 mm | |
| Spindle nose | A2 8 | |
| Hole through spindle | mm | 91 |
| Spindle power | kW | 30 |
| Speed ranges | coil switching | 2 |
| Spindle speed | rpm | 42 - 4.200 |
| Torque | Nm | 700 |
| Chuck. | ||
| Kitagawa BB210 A8 | dia [mm] | 254 mm |
| With hard jaws | ||
| Open cylinder and drawtube with boring | 81 mm | |
| General. | ||
| Machine weight | 6.900 kg | |
| Size | l x b | 4.400 x 2.040 mm |
| Equipment. | ||
| Chip conveyor | ENOMOTO | |
| High type, disposal at | 1.200 mm | |
| High pressure coolant pump | 8 bar | |
| Touch setter | ||
| CE marking | ||
| OSP Functions | ||
| Spindle orientation | ||
| Circulair trading | ||
| Profile generation | ||
| Tool life management | ||
| Tool wear compensation | ||
| Inch – metric switchable | ||
| Cycle time calculation | ||
| NC work counter | ||
| NC work monitor | ||
| Load monitor | ||
| MacMan | ||
| DNC-T1 | ||
| Thermal compensation L2 | ||
| New operation panel | ||
| NC Tailstock | ||
| NC Tailstock torque control | ||
| M-Axis orientation | ||
| Plane conversion | ||
| One Touch IGF Advanced | ||
| Plane conversion | ||
| Profile generation | ||
| Synchro. Tapping | ||
| NC torque limit | ||
| LAP 4, Nose-R comp., auto chamfering, | ||
| Arc treading | ||
| Help function, program. Help function | ||
| Pitch error comp. , Turret position compensation | ||
| Condition: very good running condition. |
